The report contains a comparison between computer based modeling of evacuation and evacuation experiments with large crowds. Crowd movement, behavior and management is examined, as well as the evacuation time. The conclusions in this report are based on observations made during the evacuation of a football ground (Swedish)..

BackgroundDiathermy is the most commonly used surgical instrument in the surgical area today. Diathermy is used in surgery to cut and coagulate tissue. The use of diathermy releases chemical substances in to the environment in the form of diathermy smoke. Research shows that these chemical substances pose health risks to both staff and patient exposed to the smoke. To protect the interdisciplinary, perioperative team from the smoke, smoke evacuation systems can be used.ObjectiveThe purpose of the study is to highlight the work environment of the perioperative team when working with diathermy smoke.MethodThe study is meant to be implemented as an empirical descriptive sample survey.

After the tsunami disaster in December 2004 many arguments were heared that one oft the major reasons behind the poor Swedish effort connected to the evacuation and health care of the Swedish citizens in Thailand right after the incident is the Swedish model with independent government authorities. By comparing the constitution, the political decision making tradition by the ministers and the handling of the catastrophe in the tree Scandinavian countries Denmark, Norway and Finland, plus analysing the behaviour of the Swedish foreign and prime minister from a rational choose inspired individual decision making theory the research shows that there is no proof that a constitutional change in Sweden into the traditional model with government authorities controlled by the ministers alone would led to a more effective crisis handling by the government due to crises concerning Swedish citizens out states. Although the research shows that the constitution and the tradition of decision making in the government provides the basic condition of the ministers individual rational decision making.

The aim of this study is to evaluate whether the value of occupant load is over or under estimated when the Swedish general value for department stores, 0,5 person/m2, is used for dimensioning shopping centers. The data that was analyzed derives from seven shopping centers and one department store. A conservative method was used to calculate the occupant load factor. The analysis shows that two groups can be discerned: one group that is characterized by a lower occupant load factor that does not exceed 0,3 person/m2, and one group with a higher occupant load factor. Shopping centers with a higher occupant load factor are located centrally in large urban areas.

Försvarsmaktens sjukvårdsorganisation var under det kalla kriget och invasionsförsvarets dagar anpassad och dimensionerad för att kunna omhänderta tusentals skadade per dygn. Sedan 1990-talet har Försvarsmaktens inriktning fokuserat på internationella insatser. I kombination med förändringar inom det medicinska området, hotbilder, skadepanorama och folkopinionen har detta lett till nya förmågor inom den militära sjukvården. Sedan en tid har Försvarsmaktens inriktning ändrats till ett mer nationellt fokus. Vad har då hänt med sjukvårdsförmågorna? Denna uppsats använder sig av Moshe Kress teorier presenterade i boken ?Operational Logistics - The Art and Science of Sustaining Military Operations? för att göra en analys av de förmågor Försvarsmaktens insatsorganisation har idag.

The thesis deals with three document retrieval models based on logic: the Boolean model,the fuzzy model and the Van Rijsbergen model.In Chapter 1, the author presents the purpose of the thesis. This is to give the logical foundationof the models, to describe them and to examine them critically. In Chapter 2, some importantnotions in document retrieval are presented. Chapter 3 is devoted to the Boolean model, Chapter4 to the fuzzy model and Chapter 5 to the Van Rijsbergen model.These three chapters are organized in the same way. First, the logical foundation of the modelis given.

The purpose with this masters thesis was to model the scanner in a system for laser bathymetry. The model was then used to develop a controller for the scanner so a good search pattern was achieved. Two different types of models have been tested, a physical model and a Black Box model of Box Jenkins type. The physical model has been derived from Lagranges equations. Identification experiments have been used to compute the Black Box model and to find the unknown parameters in the physical model.

Evaporation is a part of the chemical recovery department at wood pulping mills. The purpose of evaporation is to remove water from the black liquor, which makes the liquor combustible. The process is very energy demanding, and having a well-functioning model of the system is of greatest interest. The model can then be used to study energy consumption and to test different control strategies. Two models have been developed during the master thesis.

This report describes a synchronous machine model with magnetic saturation in d-axis, neutralconnection and electrical exciter interface for the transient simulator PSCAD/EMTDC. It hasbeen designed and verified in comparison to the regular machine model in EMTDC.The performance of the model is very good when incorporating a linear as well as a saturatedmagnetising inductance. The dynamic deviation is only thousandths to ten thousandths perunit. By using a cubic interpolation of the saturation curve, the model gives a good representationof the saturation effect. The open source code implementation of the synchronousmachine model gives the possibility to easily adapt the model to specific requirements.The derived model makes it possible to simulate a synchronous machine with its excitationsystems, e.g.

The aim of this master thesis was to create a dynamic model for the processes in a solid fuel boiler of the moving grate type. Another aim with the model was to keep it as simple as possible but still able to catch the dynamics of the processes in the bedplate of the boiler. The creation of the model had its origin from drying and combustion equations used in earlier modeling work of boilers. The represented model has been used to simulate different kinds of disturbances in a boiler and different ways to control the boiler. These tests show that controlling a number of parameters in the bed of the boiler is an effective way to keep the grate stable during disturbances.

This master?s thesis describes the development of a model of the catalystsystem aiming at control by an MPC. A well functioning model, which is suitable in control purpose, is important while emission legislation become more and more hard to fulfill for the car manufacturers. Much research has been done in the field of physical modeling of the system, but in this work a linear adaptive time discrete ARX-model is developed and validated.The systems tendency to change its dynamic during usage implies that the model must be adaptive. The developed model proved to be well functioning and shows promising conditions for the MPC design.

The aim of this project is to study the work that has been done by the youth welfare to prevent accidents and to increase the preparedness in case of fire. Further the aim is to develop a basis to improve the interaction between the fire services and the youth welfare. The conclusions that were made during the project can be used to increase the safety of the environment that estates by the youth welfare..

This report describes a synchronous machine model with magnetic saturation in d-axis, neutralconnection and electrical exciter interface for the transient simulator PSCAD/EMTDC. It hasbeen designed and verified in comparison to the regular machine model in EMTDC.The performance of the model is very good when incorporating a linear as well as a saturatedmagnetising inductance. The dynamic deviation is only thousandths to ten thousandths perunit. By using a cubic interpolation of the saturation curve, the model gives a good representationof the saturation effect. The open source code implementation of the synchronousmachine model gives the possibility to easily adapt the model to specific requirements.The derived model makes it possible to simulate a synchronous machine with its excitationsystems, e.g.

The purpose of this thesis was to analyse, model and finally generate dynamic vehicular motions in a train. The objective with the analysis was to find important motions for a realistic train experience. The motions from the analysis were then weighted against possibilities for generation in a motion platform.A dynamic motion model was created to model the selected motions. The model was implemented in a simulation environment, more specifically MATLAB/Simulink. The simulation environment was used to simulate the model and to generate outputs to control a motion platform.

This project consists of an adaptation, trial and evaluation of a model for practicing. Based on prior research I created a model aiming mainly to raise a musician?s self- awareness around the different parameters a performance consists of. An additional wish was for it to simultaneously assist the musician in monitoring his or her progress. With video recording and self-evaluation as the two main parts I tried the model by using it over a period of three months.